Import Tuner: Seibon Suit Up for Project Scion FR-S

Import Tuner’s Project FR-S gets the Seibon Carbon treatment! Check out how the transformation turned out and what they had to say about our products:

When you heat the semicrystalline organic polymer resin polyacrylonitrile to toasty 2,300 Fahrenheit, it can produce strands of carbon. These carbon strands are then woven to make – you guessed it – sheets of carbon fiber. Of course there are more processes after that to creating the composite material, such as adding epoxy resin and molding, but let’s just leave that to Wikipedia for you to research.

Back in the 1980s, the McLaren Formula One team had the crazy idea of using this special durable yet lightweight material in motorsports, and today you’ll find it everything from an F1 car to your ordinary Honda Civic. Tuners turn to this material for weight reduction and strength. I turned to Seibon for a mildly aggressive tuner appearance.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

Seibon uses only the highest-grade carbon fiber raw materials – the very same used in aviation, battleships, satellites, and rockets.

DV-Style Carbon Fiber Hood

Seibon Carbon DV-style hood for Scion FRS/ Subaru BRZ. Photo credit: Importtuner.com.

Seibon Carbon DV-style hood for Scion FRS/ Subaru BRZ. Photo credit: Importtuner.com.

I know what you’re thinking: the OEM Scion hood is made out of aluminum. Why would I want to swap it? For one, OEM sucks, and two, the Seibon piece looks bad ass. A carbon fiber hood is a simple addition to improving air cooling and aesthetics of your car.

It’ll probably be a much easier and safer process if you ask your buddy to help you with this install. The DV style hood has two vents that can help cool the engine. Inside the vents are metallic grilles, which was a little loud for my taste. We simply painted them black.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

Carbon Fiber Trunk Garnish

This piece is a simple bolt-on affair – simply pop the trunk and remove the bolts underneath. This part will delete the section with the Scion badge.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

C Style Carbon Fiber Rear Spoiler

The trunk just looks naked without a spoiler. I love how the C-Style complements the rear end. It’s not too flashy, but it’s also noticeable as well. We simply used 3M double-sided tape for the installation.

Seibon Carbon C-style rear spoiler. Photo credit: Importtuner.com

Seibon Carbon C-style rear spoiler. Photo credit: Importtuner.com

FR- Style Carbon Fiber Fender Ducts

Use care when removing the stock fender garnishes, as clips and 3M paint are holding them in. Seibon suggests removing fenders for this install.

Seibon Carbon fender ducts. Photo credit: Importtuner.com.

Seibon Carbon fender ducts. Photo credit: Importtuner.com.

Carbon Fiber Rear Diffuser

Instead of just using 3M for this diffuser, we drilled six small holes along the top of the diffuser. We used black bolts to camouflage the holes. I love how it gives the rear bumper a wet carbon fiber look, unlike the OEM part. The extended diffuser also hides the modified exhaust I plan to install.

Photo credit: importtuner.com.

Photo credit: importtuner.com.

Photo credit: Importtuner.com.

Photo credit: Importtuner.com.

Check out Import Tuner’s complete article here:

http://www.importtuner.com/tech/1401_seibon_suit_up/

More Scion FRS/Subaru parts here:

http://seiboncarbon.com/store/products.html?make=193&model=548

http://seiboncarbon.com/

Advertisements